Send me the drawings. I'll send back a priced tender.
For subcontractors and small builders who'd rather be on site than measuring drawings at eleven at night. I do the take-off, price the labour with your own day rate and crew, and hand you a pack to look over before it goes in under your name.
- Price agreed before I start
- PDF, DWG or DXF
- 15 trades
- From £295, no VAT
| Materials6 floor plans, 2 blocks, measured | £38,450 |
| Labour97 shifts at £280, crew of 4 | £27,160 |
| Plant and access | £3,900 |
| Markups17% labour, 20% materials and plant | £13,087 |
| Tender total, excl VAT | £82,597 |
Example only. The job is made up; the layout is what you get.
What you get back
The whole pack, with the working behind every figure
Not one number in an email. When the main contractor rings to ask why your price is £6k higher than the next firm's, you'll be able to open the workbook, go to the floor in question and show them exactly where the metres and the hours came from.
The tender document, PDF and Word
What your client sees. One total, the scope, what's included and excluded, and the programme. It's laid out ready for your letterhead, with the markups inside the numbers where they belong.
Take-off by floor
Quantities from every drawing, floor by floor and zone by zone, so you can see where each metre came from.
A pricing workbook that still works
Live Excel formulas, not pasted numbers. Change the day rate or a markup and the whole tender moves with it.
Programme and stages
Working days by floor and stage. The allowance for delays and changes sits in one cell you can see and adjust.
Materials lists
One per floor, grouped by system, with references back to the drawings.
Supplier schedule
Every material and quantity with the prices left blank. Send it to two or three wholesalers, then drop their real prices into the workbook.
Internal report
My assumptions, the exclusions, and anything I couldn't read from the drawings. For you, not the client.
A walk-through call
Twenty minutes on the phone or Teams before you price it up, so nothing in the pack is a surprise.
Tested on a live tender
Built on a real London job
I built the method on the electrical package for a three-building residential scheme in London: primary and secondary containment, wiring, second fix and armoured submains, basement to roof.
The scope grew while I priced it, which is normal and is exactly where spreadsheets usually fall apart. Containment came first. Then the secondary containment once the small power and lighting layouts arrived, then wiring and second fix, then the armoured cable and floor submains the first issue didn't show at all. Each change went through the same workbook and the same checks, and the total nearly trebled along the way without anyone having to re-key a number.
Every total in the workbook is checked against a separate calculation before it goes out. The check rows have to read zero. If they don't, nothing gets sent.
Trades I price
Fifteen trades, one method
Electrical is where I started. Every other trade goes through the same engine and gets priced with your rates and your crew, so the labour reflects how your gang actually works and not a national average off a website.
Electrical Tested on a live tender
Containment, wiring, second fix, fire alarm and security routes, SWA submains.
Plumbing and heating
Pipework by size and material, sanitaryware, radiators, plant connections.
Ventilation and HVAC
Ductwork by size, grilles, fans, MVHR units and insulation.
Fire protection
Sprinkler mains and heads, fire stopping, dampers, dry risers.
Drylining and ceilings
Partitions by type and height, MF ceilings, boards and beads.
Plastering and screeding
Skim, render and screed by area and depth.
Flooring and tiling
Areas by finish, with waste, trims, skirting and adhesive.
Painting and decorating
Walls, ceilings and woodwork by paint system and number of coats.
Carpentry and joinery
Doorsets, ironmongery, skirting and architrave runs, boxing in.
Masonry
Brick and block by wall type, lintels, DPCs, ties and cavity trays.
Groundworks and drainage
Dig, foundations, drainage runs by diameter, manholes, backfill.
Roofing and cladding
Roof areas by build-up, flashings, rainwater goods, cladding panels.
Windows, doors and glazing
Straight from the schedules: units by type and size, fixings, sealants.
Demolition and strip-out
Soft strip, removals, and waste by skip and type.
Fencing and landscaping
Fence runs, gates, paving and soft landscaping areas.
How it works
Four steps, and you only do two of them
You send the drawings and you check the result. The bit in the middle is mine.
Send the drawings
Upload the PDFs or DWGs with the spec. Tell me the trade, your day rate and crew size. No set rate? I'll suggest one and you approve it.
Get a fixed price
Within one working day you get the price and the date the pack lands. Nothing starts until you say yes.
I measure and price
If a drawing's missing or two of them disagree, I ask. I don't guess.
You check and submit
The pack arrives by email, and a 20-minute call to walk through it is included.
What it costs
Fixed before I start. No day rate ticking away.
Priced by the size of the drawing set, so you know the cost before you've committed to anything. The figure you see is the figure you pay: I'm not VAT registered.
Small job
- Up to 10 drawings
- One trade
- Back in 3 working days
- A shop fit-out, say, or a small block of flats
Standard job
- Up to 30 drawings
- One trade
- Back in 5 working days
- Most subcontract packages on a mid-size scheme
Larger, or several trades
- Over 30 drawings
- Or more than one trade on the same set
- Fixed price within one working day
- Date agreed with you
One round of changes is included if the drawings are revised before the tender goes in. For comparison, freelance electrical estimators were advertising at £200 to £370 a day in 2026 job listings, and a messy drawing set keeps that meter running.
Before you send anything
The small print, in plain English
I'd rather you knew this now than found out on tender day.
- Material prices are budget rates until you get supplier quotes. That's what the supplier schedule is for. Check them before you submit.
- I price what's drawn and specified. Anything that hasn't been issued yet (a lighting layout that's still "to follow", for example) is either excluded or carried as a named allowance. Never quietly guessed.
- I don't visit site. If parking or restricted working hours will hit the price, tell me and I'll put them in.
- The tender goes out under your name and the final price is your call. My liability is limited to the fee you paid.
- Your drawings stay private. I use them for your estimate and nothing else, and delete them 90 days after delivery unless you ask me to keep them.
Questions
What people ask first
Which drawing files can you work with?
PDF, DWG and DXF. Revit exports are the easiest. Scanned drawings work too, they just take longer, and I'll tell you if that moves the date.
Do you use AI?
For some of the measuring, yes. That's how the price stays where it is. Every total is checked against a separate calculation before it reaches you, and anything I couldn't measure is labelled as an allowance, so you can see which numbers are measured and which are judgement.
Can I use my own markups?
Yes. I start at 17% on labour and 20% on materials and plant, and you can change any of them in the workbook. The tender shows one total with the markups built in, never the markups themselves.
Why is there no VAT?
I'm self-employed and not VAT registered, so the price on this page is the whole price. If you aren't VAT registered either, that's 20% you'd otherwise pay and never get back.
I do domestic jobs. Is this for me?
Probably not. For extensions, rewires and bathrooms the BuildEstimate app is quicker and cheaper: describe the job on your phone and it builds the quote. This service is for tender packages that come with a full drawing set.
How do I pay?
By bank transfer once you've accepted the fixed price, before I start. You get an invoice from Robert Niculescu.
Who are you?
Robert Niculescu, a self-employed estimator in Dagenham, east London. I'm also a software engineer: I built BuildEstimate, the quoting app on the App Store and Google Play, and the estimating engine I use for this work. That's why the workbooks are formulas you can follow rather than a PDF you have to trust. This service is me as a sole trader, separate from my company Alpha IT Solutions Ltd, which sells the app.
Get a fixed price
Send your drawings
Fill this in and your email app opens with it all written out. Attach the drawings, press send, and I'll come back within one working day with a price and a date. You pay nothing until you accept it.
Drawing set too big to attach? Put a WeTransfer link in the notes.
Prefer to write it yourself? Email hello@build-estimate.app.
Rather talk? Ring 07853 610930.